Filter
Top Products
4–27
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
4) Remove the six screws w and two E-rings e;
then, remove the support plate r.
5) Remove the two pick-up clutches t.
Figure 4-347
11.Removing the Driver PCB (Cassette
Module-A2/Cassette Pedestal-K1)
1) Remove the rear cover/upper rear cover.
2) Disconnect all connectors from the cassette
driver PCB q.
2) Remove the four screws w, and remove the
driver PCB q.
Figure 4-348
H. Paper Deck Pedestal-K1
1. Removing the Pedestal Motor Drive
Assembly
1) Slide out the holding tray to the front.
2) Remove the rear cover.
3) Disconnect the four connectors q, and remove
the harness from harness guide w.
4) Remove the three mounting screws e, and
remove the pedestal motor drive assembly. r.
Figure 4-349
2. Removing the Paper Deck
1) Remove the front right cover and the front left
cover.
2) Remove the mounting screw q, and remove
the stopper plate w from both left and right.
Figure 4-350 (right)
2
3
3
4
5
2
1
2
2
4
3
3
2
1
1
2