Filter
Top Products
GENERAL DESCRIPTION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
1–17
C. Using the Stack Bypass
You can place up to 50 sheets of copy paper (a
stack approximately 5 mm high) in the stack bypass
to be automatically fed into the copier. Use the stack
bypass when you want to copy on special stock,
such as transparencies or labels, or when the paper
size that you want to copy on will not fit in a cassette.
Note:
Note the following points when using the stack
bypass:
a. Paper size: A5 (horizontal placement) to A3
b. Paper weight: 64 to 128 g/m
2
c. Acceptable paper
• Plain paper (64 to 128 g/m
2
)
• Coloured paper
• No. 2 master drawing paper
• Labels
• Transparencies
• Postcards
• Recycled paper
d. Curl down copy stock before use.
e. There are some types of copy stock which meet
the above specifications but which cannot be
fed in the stack bypass.
Notes:
1. Do not use the sort/staple-sort/group mode
when copying postcards as it may result in
a paper jam.
2. A5R-size copy paper cannot be used to
make two-sided or overlay copies.
3. Insert A4-size labels horizontally.
4. If you want the copy stock placed in the
stack bypass to be selected when using
Auto Paper Selection, specify the size.
1) Place your originals.
Figure 1-407
Figure 1-408
2) Programme the copy settings.
3) Open the stack bypass.
Figure 1-409