Filter
Top Products
5–21
INSTALLATION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
6) Close the cover.
7) Connect the connector on the relay harness to
the connector of the cassette heater (rear side
plate of the cassette feeding unit/module). (Con-
nect the side where the harness is bundled with
a tie-wrap.)
Figure 5-613
8) Install the cord clamp to the hole in the rear side
plate of the cassette feeding unit/pedestal.
• Cassette Feeding Module-A2/Cassette Feed-
ing Unit-K1
Figure 5-614
Connector
Cord clamp
Tie-wrap
Cord clamp
• Cassette Feeding Module-B2
Figure 5-615
9) Arrange the relay harness on the rear side plate
as indicated (Cassette Feeding Unit-K1).
Figure 5-616
Cord clamp
Relay harness