Filter
Top Products
5–17
INSTALLATION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Connector
Support
member
Screw
Connector cover
Cassette heater
Screws
Mounting plate 1
Front cover
Front lower cover
Rear cover
B. Installation (to copying
machine)
1) Remove both top and bottom cassettes, and
remove the front cover, front lower cover, and
rear cover.
Figure 5-602
2) Disconnect the connector for the heater from
the copier’s rear, and remove the connector
support member.
Figure 5-603
3) Install the mounting plate 1 to the cassette
heater with two screws (black; M4×6).
Figure 5-604
4) Remove the screw, and remove the connector
cover of the cassette heater.
Figure 5-605