Filter
Top Products
5–25
INSTALLATION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
B. Installation
1) Remove the copier’s bottom cassette.
2) Remove the two screws, and remove the copier’s
front right cover; then, disengage the snap, and
remove the front lower cover.
Figure 5-702
3) Remove the left cover (4 screws), front upper
cover (2 screws), front left cover (3 screws), and
rear cover (4 screws); then, remove the two
screws, and remove the face plate.
Figure 5-703
Front lower
cover
Front right cover
4) Remove the paper deck.
5) Install the power cord mount. (Use the mounting
screw removed from the face plate.)
Figure 5-704
6) Install the stay with one mounting screw (white;
M4×6).
Figure 5-705
Power cord mount
Mounting screws
Stay
Screw
Left cover
Front left cover
Front upper cover
Rear cover
Face plate