Filter
Top Products
4–8
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
Figure 4-211
Caution:
When installing the cable spring, pay attention to the orientation of the spring. Be sure to install as
indicated; if installed in the wrong direction, the hook tip of the spring can interfere with the cable.
Figure 4-212
Hook
Hook
Cable
Cable
(front) (rear)
Cable spring Cable spring
Screw
Loosen the
screw,and shift
it down.
Re-tighten
the screw.
Attach the mirror
positioning tool.
Set screws
Loosen the set
screws to enable
free rotation.
Put the steel ball
into the hole in
the pulley; wind
the cable nine
times toward the
inside, and four
times toward the
outside; then, snap
on the pulley clip.
Pulley clip
Steel ball
46.5~49mm
8
9
7
4
11
10
1
5
6
3
2