Filter
Top Products
4–24
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
G. Cassette Unit
1. Removing the Copier from the Cas-
sette Unit
1) Disconnect the copier’s power plug.
2) Disconnect the cassette unit connector q from
the copier.
Figure 4-334
3) Holding the copier’s grips, remove the copier
from the cassette unit.
2. Removing the Pick-Up Roller Unit
1) Remove the cassette.
2) Remove the stop ring (plastic) q found at the
front of the pick-up roller unit.
Figure 4-335
3) Remove the bushing w of the pick-up roller unit
e while pushing it down toward the left.
Figure 4-336
3. Removing the Pick-Up Roller
1) Remove the pick-up roller unit. (See “Removing
the Pick-Up Roller Unit.”)
2) Remove the E-rings q and w; then, remove
the pick-up roller e together with the collar.
Caution:
Take care not to lose the pin from the rear.
Figure 4-337
1
1
2
3
3
2
1