Filter
Top Products
4–41
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
D. Drum Heater*
* This may not be available for sale in some areas.
1. Installing the Drum Heater
1) Remove the transfer guide from the copier.
2) Install the cord clamp w to the heater holder q.
Figure 4-509
3) Put the heater unit e into the heater holder.
Figure 4-510
4) Install the heater holder t to the transfer guide
y with two screws r.
FIgure 4-511
5) Install the transfer guide to the copier.
6) Connect the connector u of the heater to the
copier’s connector.
Figure 4-512
Caution:
As necessary, keep the heater harness in place
on the cord guide using tie-wraps.
1
2
3
4
4
5
6
7