Filter
Top Products
4–17
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
B. Multifeeder Assembly
1. Removing the Multifeeder Pick-up
Roller Unit
1) Open the right door.
2) Remove the E-ring q, and pull out the bushing
w.
3) Remove the two screws e.
Figure 4-309
4) Remove the screw r, and remove the roller
cover t.
Figure 4-310
5) Shift the multifeeder pick-up roller unit y to-
ward the rear, and remove it.
Figure 4-311
2. Removing the Multifeeder Pick-Up
Roller
1) Remove the multifeeder pick-up roller unit. (See
“Removing the Multifeeder Pick-Up Roller Unit.”)
2) Remove the stop ring (plastic) q, and remove
the pick-up roller w together with its collar.
Caution:
Take care not to lose the pin from the rear.
Figure 4-312
1
2
3
4
5
1 2
6