Filter
Top Products
5–6
INSTALLATION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Work
Execute ‘No. 401’ in service mode.
• Press the service mode switch
(SW850), ‘4’ on the keypad, AE
Key, and Start key in sequence.
Make sure that step 10 has been
completed; then, turn off the
power, and open the copier’s top
unit.
Remove the static eliminator, and
clean it with the static eliminator
brush; then, set the static elimina-
tor.
Turn on the power.
Only the European model, in case
of the other model, go to step 15.
Execute ‘No. 412’ in service mode.
• Press the service mode switch
(SW850), ‘4’ on the keypad, AE
key, ‘1’ and ‘2’ on the keypad,
and Start key in sequence.
Set the settings for user mode and
settings mode in service mode to
suit the needs of the user.
Tailor the cassette to suit the
desired size by operating the size
guide plate and size detecting
lever; then, attach the size label.
Put copy paper in the cassette,
and set the cassette in the copier.
Attach the copy tray.
Remove the door switch activator,
and close the front door.
Step
10
11
12
13
14
15
16
17
18
19
Remarks
The copier supplies toner from the toner container to the
developing assembly (about 5 min).
Caution:
• Do not turn off the power or remove the door switch
actuator while the machine is operating.
The copier automatically sets the APVC value.
See “E. Changing the Cassette Size.”
• Make sure that the Add Paper message turns off.
• Make sure that the paper indicator matches with the
size of the cassette.
• Press the keys on the control panel other than the Copy
Start key to make sure that all respective operations are
normal.