Filter
Top Products
3–86
OPERATIONS AND TIMING
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
To change the size of a cassette, move the
guide plates (horizontal, vertical) inside the cassette
and also move the paper size lever found at the front
of the cassette to the left or right so that the arrow
points to the appropriate paper size as indicated in
Figure 3-441.
Caution:
A discrepancy between the size of the copy
paper being used and the size selected by the
paper size lever will trigger an incorrect copying
sequence, leading to jamming and soiling.
Advise the user so that both sizes match.
Reference:
The size of copy paper which is in wide use in
a specific area may not be common in another
area. Setting paper of a size different from the
pre-set size will not turn on the size indication on
the display. This however, will not prevent the
correct copying control sequence for the paper.
For instance, if you set LTR copy paper in an
AB-configured machine (also setting the paper
size lever to LTR size), the machine will control
copying operations based on LTR size paper.
Paper size lever
Guide plates (vertical)
Guide plate (horizontal)
Figure 3-441