Filter
Top Products
4–23
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
F. Duplexing Assembly
1. Removing the Duplexing Assembly
Inlet Unit
1) Remove the left cover.
2) Remove the delivery roller.
3) Disconnect the connector q, and remove the
duplexing unit w inlet unit.
Figure 4-330
2. Removing the Duplexing Unit
1) Remove the front door, two cassettes and the
front left cover.
2) Remove the three mounting screws q, and
disconnect the connector w; then, remove the
paper size detection unit 1 e.
Figure 4-331
2
1
3
1
3) Remove the lower rear cover.
4) Disconnect the connectors (J325, J326) r.
Figure 4-332
5) Remove the two mounting screws t, and re-
move the duplexing unit y.
Figure 4-333
4
2
1
5
6