Filter
Top Products
5–18
INSTALLATION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Connector on
the heater
Connector on
the copier
Screws
Cassette heater
Heater mounting hole
5) Put the screw back, and tighten it.
6) Insert the bend found at the rear of the heater
into the heater mounting hole in the copier’s
rear plate.
Figure 5-606
7) Fix the mounting plate 1 in place to the copier’s
side plate with two screws (white; M3×6).
Figure 5-607
8) Connect the copier’s connector to the connector
on the cassette heater visible at the rear of the
copier.
Figure 5-608
9) Install the copier’s rear cover, front lower cover,
and front cover.
10) Slide both top and bottom cassettes back in.
11) Open the copier’s top unit.