Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
5-4 208967-B
Figure 5-4 is a sample display.
Passport-8610# show ports stats routing
================================================================================
Port Stats Routing
================================================================================
PORT IN_FRAME IN_FRAME IN OUT_FRAME OUT_FRAME
NUM UNICAST MULTICAST DISCARD UNICAST MULTICAST
--------------------------------------------------------------------------------
1/1 4294832127 4294967039 4294827993 0 0
1/2 4294963199 4294705151 3952869371 0 0
1/3 4292870143 3758096383 3758088157 0 0
1/4 4273930239 4277926911 3221220665 0 0
1/5 4294967295 4294967039 2071903849 0 0
1/6 4294967295 4294966783 4160192501 0 0
1/7 4294967295 4294967295 4227792893 0 0
1/8 4294965247 3724541951 4294957053 0 0
1/9 4160749567 4294966655 4160217083 0 0
1/10 0 0 0 0 0
1/11 4261412863 4294443007 4294966781 0 0
Figure 5-4.
show ports stats routing
Command (Partial Output)
DVMRP Commands
Distance Vector Multicast Routing Protocol (DVMRP) is used between routers to
exchange their multicast routing information. The protocol can be configured on a
VLAN, but it must be enabled globally in order to take effect.
config ip dvmrp Commands
These commands are the global DVMRP commands.
config ip dvmrp Commands
The
config ip dvmrp commands use the following syntax and parameters:
config ip dvmrp
followed by:
info Displays DVMRP settings on the switch.
disable Globally disables DVMRP on the switch.
enable Globally enables DVMRP on the switch.
cli.book Page4 Wednesday,April19, 2000 3:14PM