Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
3-18 208967-B
delete-message-digest-key
<md5-key-id>
Deletes the specified md5 key ID from the
configured md5 keys.
hello-interval <seconds> Sets the hello interval on the virtual interface
for the length of time (in seconds) between the
hello packets that the router sends on the
interface.
• <seconds> is between 1 and 65535.
The default is 10.
retransmit-interval
<seconds>
Sets the retransmit interval for the virtual interface,
the number of seconds between link-state
advertisement retransmissions.
• <seconds> is between 1 and 3600
.
transit-delay <seconds> Sets the transmit delay for the virtual interface, the
estimated number of seconds it takes to transmit a
link-state update over the interface.
• <seconds> is between 1 and 3600
.
Note: Both sides of the OSPF connection must use the same authentication
type and key.
config ip ospf area <ipaddr> virtual-interface <nbr>
followed by:
cli.book Page18 Wednesday, April 19,2000 3:14 PM