Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
3-20 208967-B
Figure 3-12 shows a sample of the output.
Passport-8610/show/ip/ospf# ase
================================================================================
Ospf AsExternal Lsas
================================================================================
LSTYPE LINKSTATEID ADV_ROUTER E_METRIC ASE_FWD_ADDR AGE SEQ_NBR CSUM
--------------------------------------------------------------------------------
AsExternal 199.100.1.0 45.57.236.0 0 10 0.0.0.0 608 0x80000001 0x4fb8
Figure 3-12.
show ip ospf ase
Command Output
show ip ospf default-metric Command
The
show ip ospf default-metric command displays the OSPF default metric
information for each type of port.
The command uses the syntax:
show ip ospf default-metric
Figure 3-13 is a sample.
Passport-8606# show ip ospf default-metric
===========================================================================
Ospf Default Metric
===========================================================================
10MbpsPortDefaultMetric: 100
100MbpsPortDefaultMetric: 10
1000MbpsPortDefaultMetric: 1
Figure 3-13.
show ip ospf default-metric
Command Output
show ip ospf host-route Command
The
show ip ospf host-route command displays the OSPF host route
configuration including host IP address, type of service, and the metric used.
The command uses the syntax:
show ip ospf host-route
cli.book Page20 Wednesday, April 19,2000 3:14 PM