Filter
Top Products
IP Routing and ARP Commands
208967-B 1-7
These commands take the following syntax and parameters:
Figure 1-7 isasampleoftheconfig ethernet ip info command.
Passport-8610# config ethernet 9/13 ip info
Sub-Context:
Current Context:
Port 9/13 :
create : 5.5.5.5/255.0.0.0 Vlan5 mac_offset 0
delete : N/A
Figure 1-7.
config ethernet ip info
Command Output
config ethernet <ports> ip
followed by:
info Displays configured IP characteristics on the port.
create <ipaddr/mask> <vid>
[mac_offset <value>]
Assigns an IP address to a port. Assigning an IP
address to a port creates a Brouter port (see
page 1-8
).
• <ipaddr/mask> is the IP address and mask
{a.b.c.d}.
• <vid> is the VLAN ID {1..4094}.
• [mac_offset <value>] is a user-assigned
MAC address. This MAC address is in place of
the default MAC address.
delete <ipaddr> Deletes an IP address from a Brouter port.
cli.book Page7 Wednesday,April19, 2000 3:14PM