Filter
Top Products
IP Routing and ARP Commands
208967-B 1-15
config vlan ip arp Commands
The general commands for VLAN ARP require a VLAN ID <vid> from 1 to
4094.
config vlan ip arp Command
The
config vlan ip arp commands allow you to configure IP ARPs on
VLANs.
The commands take the following syntax and parameters:
Figure 1-16
shows a sample of the config vlan ip proxy info command.
Passport-8610# config vlan 1 ip proxy info
Sub-Context:
Current Context:
proxy : disable
Figure 1-16.
config vlan ip proxy info
Command Output
config vlan <vid> ip
followed by:
arp-response disable Disables ARP response on the VLAN.
arp-response enable Enables ARP response on the VLAN. This state is
the default state.
arp-response info Displays VLAN ARP response status.
proxy disable Disables proxy ARP on the VLAN. This is the default
state.
proxy enable Enables proxy ARP on the VLAN.
proxy info Displays proxy ARP status on the VLAN.
cli.book Page15 Wednesday, April 19,2000 3:14 PM