Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
7-12 208967-B
Figure 7-6 shows the config ip policy rip announce info command.
Passport-8610/config/ip/policy/rip# announce 3 info
Sub-Context: accept announce
Current Context:
action : ignore
add-route-source : direct|static|rip|ospf
advertise-net-list : 3
create :
delete : N/A
enable : true
exact-net-list : 0
name : POLICY-3
ospf-router-list : 0
ospf-route-type : any
outbound-interface-list : 0
precedence : 0
range-net-list : 0
remove-route-source : N/A
rip-gateway-list : 0
rip-interface-list : 0
rip-metric : 0
Figure 7-6.
config ip policy rip announce info
Command Output
show ip policy Commands
The following commands provide information about the IP policies that are set up
on the switch.
show ip policy addrlist info Command
The
show ip policy addrlist info command displays the IP policy address
lists set on the switch. If no address list ID is entered, all address lists on the
switch are listed.
This command uses the syntax:
show ip policy addrlist info [id <value>]
cli.book Page12 Wednesday, April 19,2000 3:14 PM