Filter
Top Products
IPX Commands
208967-B 6-11
show ipx Commands
These commands display the configuration of IPX on the switch.
show ipx config Command
The
show ipx config command displays general IPX configuration information
for the switch or for a specified IPX network number.
The command uses the syntax:
show ipx config [<IPX-network-number>]
Figure 6-3 is a sample output.
Passport-8610/show/ipx# config
================================================================================
Ipx Config
================================================================================
CID NETNUM ENCAPSULATION RIP STATUS UPD HLD DLY SAP STATUS UPD HLD DLY
--------------------------------------------------------------------------------
1 0x00004444 LLC RIP Enabled 60 3 20 SAP Enabled 60 3 20
2 0x00005555 SNAP RIP Enabled 60 3 20 SAP Enabled 60 3 20
Figure 6-3.
show ipx config
Command Output
cli.book Page11 Wednesday, April 19,2000 3:14 PM