Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
7-4 208967-B
config ip policy ospf Commands
The
config ip policy ospf commands allow you to globally apply the
configured OSPF accept or announce policies to the switch. After you have set up
OSPF policies, you must apply the policies before they take effect.
config ip policy ospf accept Commands
The
config ip policy ospf accept commands allow you to configure the
OSPF accept policy with a policy ID <pid> range from 6001 to 7000.
The commands use the following syntax and parameters:
config ip policy ospf
followed by:
info Displays global status of OSPF accept and announce
policies.
apply-accept Globally applies OSPF accept policies to the switch.
apply-announce Globally applies OSPF announce policies to the switch.
Note: Although individual policies may be configured and enabled, they will
not take effect until the global apply command is issued.
config ip policy ospf accept <pid>
followed by:
info Displays the current OSPF accept policy
settings.
action <accept|ignore> Selects whether the OSPF policy action will be
to accept or ignore external route information.
create Creates an OSPF accept policy.
delete Deletes an OSPF accept policy.
disable Disables an OSPF accept policy.
enable Enables an OSPF accept policy.
cli.book Page4 Wednesday,April19, 2000 3:14PM