Filter
Top Products
IP Routing and ARP Commands
208967-B 1-13
Passport-8610# show ip arp info
===========================================================================
Ip Arp
===========================================================================
IP_ADDRESS MAC_ADDRESS VLAN PORT TYPE TTL
---------------------------------------------------------------------------
161.69.150.10 00:e0:16:ff:01:3a 2 1/1 DYNAMIC 2133
161.69.150.1 00:80:2d:23:02:00 2 - LOCAL 2160
161.69.150.255 ff:ff:ff:ff:ff:ff 2 1/1 LOCAL 2160
161.69.100.255 ff:ff:ff:ff:ff:ff 2 1/1 LOCAL 2160
Total 4
Figure 1-13.
show ip arp info
Command Output
config ethernet <ports> ip arp Commands
These commands allow you to configure IP ARP on specific ports. The
commands require the parameter <ports> as the port or list of ports on which you
are running the command {slot/port[-slot/port][, ...]}.
config ethernet <ports> ip Commands
The
config ethernet <ports> ip commands take the following syntax and
parameters:
config ethernet <ports> ip
followed by:
arp-response disable Disables ARP responses on the port.
arp-response enable Enables ARP responses on the port.
arp-response info Displays ARP response status on the port.
proxy disable Disables proxy ARP on the port.
proxy enable Enables proxy ARP on the port, allowing a router
to answer a local ARP request for a remote
destination.
proxy info Displays ARP proxy status on the port.
cli.book Page13 Wednesday, April 19,2000 3:14 PM