Filter
Top Products
Policies Commands
208967-B 7-11
outbound-interface-list
<addrlist id>
Indicates the entries in the outbound lists that
are associated with this policy.
• <addrlist id> is OSPF router-id list
{0..1000}.
precedence <precedence> Sets the precedence for the RIP announce
policy.
• <precedence> is the range is 0 to
65535. If multiple policies apply, the higher
precedence is used.
range-netlist <netlist id> Sets the RIP announce policy to match any
network number that falls into the indicated
range.
• <netlist id> is the range from 0 to
1000.
remove-route-source
<direct|static|rip|ospf|any>
Removes a route source from the announce
policy.
rip-gateway-list <addrlist id> Identifies the RIP gateway lists that are
associated with this policy. The RIP gateway
list ID (0 to 1000) applies only to RIP sourced
routes if RIP is included as a route source.
rip-interface-list <listid> Indicates the entries in the RIP interface lists
that are associated with this policy. The RIP
interface list ID (0 to 1000) applies only to RIP
sourced routes if RIP is included as a route
source.
rip-metric <rip-metric> Sets the RIP external metric (0 to 15) for the
policy, the external metric to use when
advertising a route that matches this policy.
Meaningful only if the set action is announce.
config ip policy rip announce <pid>
followed by:
cli.book Page11 Wednesday, April 19,2000 3:14 PM