Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
2-10 208967-B
show ip udpfwd Commands
These commands display information about the UDP forwarding characteristics
of the switch.
show ip udpfwd interface info Command
The
show ip udpfwd interface info command displays information about the
UDP interface for all IP addresses or a specified IP address.
The command uses the syntax:
show ip udpfwd interface info [<ipaddr>]
Figure 2-7 is a sample display.
Passport-8610/show/ip/udpfwd/interface# info
================================================================================
Udp Broadcast Interface Forwarding Tbl
================================================================================
INTF_ADDR FWD MAXTTL RXPKTS FWDPKTS DRPTTLEX DRPDEST DRP_UNKNOWN
LISTID UNREACH PROTOCOL
--------------------------------------------------------------------------------
161.69.150.1 1 4 9 7 0 0 0
Figure 2-7.
show ip udpfwd interface info
Command Output
show ip udpfwd portfwd info Command
The
show ip udpfwd portfwd info command displays the UDP port forwarding
table.
The command uses the syntax:
show ip udpfwd portfwd info
maxttl <maxttl> Sets maximum time-to-live for the UDP broadcast
forwarded by the interface.
udpportfwdlist
<fwdlistid>
Changes the port forwarding list {1..1000}.
config ip udpfwd interface <ipaddr>
followed by:
cli.book Page10 Wednesday, April 19,2000 3:14 PM