Filter
Top Products
RIP and OSPF Commands
208967-B 3-21
show ip ospf ifstats Command
The
show ip ospf ifstats command displays IP OSPF interface statistics
where the parameter mismatch is the number of times the area ID is not matched.
The command uses the syntax:
show ip ospf ifstats [mismatch] [detail]
The output format is shown in Figure 3-14.
Passport-8610/show/ip/ospf# ifstats
================================================================================
Ospf Interface Statistics
================================================================================
---HELLOS---- ---DBS--- -LS REQ-- --LS UDP--- --LS ACK---
INTERFACE RX TX RX TX RX TX RX TX RX Tx
--------------------------------------------------------------------------------
130.1.1.1 86 85 8311131 2 1
Figure 3-14.
show ip ospf ifstats
Command Output
show ip ospf info Command
The
show ip ospf info command displays the current OSPF settings for the
switch.
The command uses the syntax:
show ip ospf info
Figure 3-15 is a sample display.
Passport-8610/show/ip/ospf# info
===========================================================================
Ospf General
===========================================================================
RouterId: 45.57.0.0
AdminStat: enabled
VersionNumber: 2
AreaBdrRtrStatus: false
ASBdrRtrStatus: false
ExternLsaCount: 1
ExternLsaCksumSum: 20408(0x4fb8)
TOSSupport: 0
OriginateNewLsas: 3
RxNewLsas: 12
TrapEnable: false
AutoVirtLinkEnable: false
SpfHoldDownTime: 10
Figure 3-15.
show ip ospf info
Command Output
cli.book Page21 Wednesday, April 19,2000 3:14 PM