Filter
Top Products
RIP and OSPF Commands
208967-B 3-3
Figure 3-1 shows a sample of the config ip rip info command.
Passport-8610# config ip rip info
Sub-Context:
Current Context:
enable : false
holddown : 120
updatetime : 30
domain :
- 10.10.40.34
-0
receive :
- 10.10.40.34
mode - rip1OrRip2
send :
- 10.10.40.34
mode - rip1Compatible
Figure 3-1.
config ip rip info
Command Output
show ip rip Commands
These commands display information about the RIP configuration on the switch.
show ip rip info Command
The
show ip rip info command displays the RIP global status on the switch.
The command’s syntax is:
show ip rip info
Figure 3-2 is a sample.
Passport-8610/show/ip/rip# info
===========================================================================
Rip Global
===========================================================================
Rip : Disabled
Update Time : 30
HoldDown Time : 120
Route Changes : 0
Queries : 0
Domain : 0
Figure 3-2.
show ip rip
Command Output
cli.book Page3 Wednesday,April19, 2000 3:14PM