Filter
Top Products
RIP and OSPF Commands
208967-B 3-19
show ip ospf Commands
These commands display the switch OSPF parameters.
show ip ospf area Command
The
show ip ospf area command displays the OSPF area parameters.
The command uses the syntax:
show ip ospf area
Figure 3-11 is a sample.
Passport-8610/show/ip/ospf# area
================================================================================
Ospf Area
================================================================================
AREA_ID STUB_AREA NSSA IMPORT_SUM ACTIVE_IFCNT
--------------------------------------------------------------------------------
0.0.0.0 false false true 0
1.1.1.1 false false true 1
STUB_COST SPF_RUNS BDR_RTR_CNT ASBDR_RTR_CNT LSA_CNT LSACK_SUM
--------------------------------------------------------------------------------
080 0 00
1 8 0 1 3 128484
Figure 3-11.
show ip ospf area
Command Output
show ip ospf ase Command
The
show ip ospf ase command displays the OSPF Autonomous System
External (ASE) link state advertisements.
The command uses the syntax:
show ip ospf ase [metric-type <value>]
Information is displayed for all metric types or for the type specified.
cli.book Page19 Wednesday, April 19,2000 3:14 PM