Filter
Top Products
IP QoS and Traffic Filter Commands
208967-A 8-21
show ip traffic-filter global Command
The
show ip traffic-filter global command displays global filters for the
switch or for the specified filter IDs.
This command uses the syntax:
show ip traffic-filter global [<fid>].
Figure 8-11 is a display showing all filters.
Passport-8610:5/show/ip/traffic-filter# global
========================================================================
Ip Traffic-filter Global Filters
========================================================================
ID NAME TYPE SRC_OPTION DST_OPTION PROTOCOL MIRROR
1 global-1 global ignore ignore ignore false
DST_ADDR DST_MASK DSTPT SRC_ADDR SRC_MASK
SRCPT
0.0.0.0 0.0.0.0 0 0.0.0.0 0.0.0.0 0
TCPCONNECT MODE STOP_ON_MATCH
false useDefaultAction true
DS_MT_DS_FIELD DS_MT_DS_RSVED DS_MD_8021P DS_MD_DSCP
000000 00:disable 0:enable 100011:enable
DS_PRO_ID M_ICMP_REQ M_IP_FRAG STATISTICS
0 false false disable
Figure 8-11.
show ip traffic-filter global
Command Output
show ip traffic-filter info global-set Command
The
show ip traffic-filter info global-set command displays
information about the specified global filter list or all global filter lists on the
switch.
This command uses the syntax:
show ip traffic-filter info global-set [<id>]
cli.book Page21 Wednesday, April 19,2000 3:14 PM