Filter
Top Products
Reference for the Accelar 8000 Series Command Line Interface Routing Operations
8-20 208967-A
Figure 8-10 shows the display for one filter ID.
Passport-8610# show ip traffic-filter destination
========================================================================
Ip Traffic-filter Destination Filters
========================================================================
ID NAME TYPE SRC_OPTION DST_OPTION PROTOCOL MIRROR
1 destination ignore ignore ignore false
DST_ADDR DST_MASK DSTPT SRC_ADDR SRC_MASK SRCPT
0.0.0.0 0.0.0.0 0 0.0.0.0 0.0.0.0 0
TCPCONNECT MODE STOP_ON_MATCH
false useDefaultAction true
DS_MT_DS_FIELD DS_MT_DS_RSVED DS_MD_8021P DS_MD_DSCP
000000 00:disable 0:enable 100011:enable
DS_PRO_ID M_ICMP_REQ M_IP_FRAG STATISTICS
0 false false disable
Figure 8-10.
show ip traffic-filter destination
Command Output
show ip traffic-filter disabled Command
The
show ip traffic-filter disabled command displays information about
the disabled filters on the switch. If port numbers are entered, information is
displayed only for those ports.
This command uses the format:
show ip traffic-filter disabled [<ports>]
show ip traffic-filter enabled Command
The
show ip traffic-filter enabled command displays information about
the enabled filters on the switch or on specified port.
This command uses the syntax:
show ip traffic-filter enabled [<ports>]
cli.book Page20 Wednesday, April 19,2000 3:14 PM