Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
3-6 208967-B
Figure 3-4 shows a sample of the config ethernet ip rip info command.
Passport-8610# config ethernet 9/2 ip rip info
Sub-Context:
Current Context:
Port 9/2 :
advertise-when-down : disable
auto-aggr : disable
default-listen : enable
default-supply : disable
rip : disable
trigger : disable
listen : enable
manualtrigger : N/A
poison : disable
supply : enable
Figure 3-4.
config ethernet ip rip info
Command Output
Table 3-1 indicates the relationship between switch action and the RIP supply and
listen settings.
Table 3-1. RIP Supply and Listen Settings and Switch Action
RIP Supply Settings RIP Listen Settings
Switch Action
Supply Default Supply Listen Default Listen
Disabled Disabled Sends no RIP updates.
Enabled Disabled Sends RIP updates except the
default.
Disabled Enabled Sends only the default (default
route must exist in routing
table).
Enabled Enabled Sends RIP updates including
the default route (if it exists).
Disabled Disabled Does not listen for RIP
updates.
Enabled Disabled Listens for all RIP updates
except the default.
cli.book Page6 Wednesday,April19, 2000 3:14PM