Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
5-2 208967-B
show ip mroute Commands
These commands display information about the multicast route(s) set up on the
switch.
show ip mroute interface Command
The
show ip mroute interface command displays information about the
multicast interface.
The command uses the syntax:
show ip mroute interface
Figure 5-1 is a sample display.
Passport-8610# show ip mroute interface
==================================================================
Mroute Interface
==================================================================
INTERFACE TTL PROTOCOL
------------------------------------------------------------------
Vlan20 1 dvmrp
Vlan21 1 dvmrp
Figure 5-1.
show ip mroute interface
Command Output
show ip mroute next-hop Command
The
show ip mroute next-hop command displays information about the next
hop for the multicast route.
The command uses the syntax:
show ip mroute next-hop
Figure 5-2 is a sample display.
Passport-8610# show ip mroute next-hop
================================================================================
Mroute Next Hop
================================================================================
INTERFACE GROUP SOURCE SRCMASK ADDRESS
--------------------------------------------------------------------------------
INTERFACE STATE EXPIRY_TIME CLOSE_HOP PRIORITY
-------------------------------------------------------------------------------
Figure 5-2.
show ip mroute next-hop
Command Output
cli.book Page2 Wednesday,April19, 2000 3:14PM