Filter
Top Products
IP Multicast Commands
208967-B 5-15
show ip l3-igmp interface Command
The
show ip l3-igmp interface command displays the following information
for the interfaces on which layer 3 IGMP is enabled.
The command uses the syntax:
show ip l3-igmp interface
Figure 5-16 is a sample output.
Passport-8610/show/ip/l3-igmp# interface
================================================================================
Igmp Interface
================================================================================
QUERY QUERY WRONG LASTMEM
IF INTVL STATUS VERS. QUERIER MAXRSPT QUERY JOINS ROBUST QUERY
--------------------------------------------------------------------------------
P7/1 125 inact 2 0.0.0.0 10 0 0 2 1
V2 125 inact 2 0.0.0.0 10 0 0 2 1
V3 125 inact 2 0.0.0.0 10 0 0 2 1
V4 125 inact 2 0.0.0.0 10 0 0 2 1
V5 125 inact 2 0.0.0.0 10 0 0 2 1
V6 125 inact 2 0.0.0.0 10 0 0 2 1
V10 125 inact 2 0.0.0.0 10 0 0 2 1
V15 125 inact 2 0.0.0.0 10 0 0 2 1
V18 125 inact 2 0.0.0.0 10 0 0 2 1
V23 125 inact 2 0.0.0.0 10 0 0 2 1
V27 125 inact 2 0.0.0.0 10 0 0 2 1
V51 125 inact 2 0.0.0.0 10 0 0 2 1
V52 125 active 2 192.28.1.20 10 0 1 2 1
Figure 5-16.
show ip l3-igmp interface
Command Output
cli.book Page15 Wednesday, April 19,2000 3:14 PM