Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
4-6 208967-B
show vlan info vrrp extended Command
The
show vlan info vrrp extended command displays the extended VRRP
configuration for all VLANs on the switch or for the specified VLAN.
The command uses the syntax:
show vlan info vrrp extended [<vid>]
Figure 4-5 is a sample output.
Passport-8610# show vlan info vrrp extended
================================================================================
Vlan Vrrp Extended
================================================================================
MASTER ADVERTISE CRITICAL
VID STATE CONTROL PRIORITY IPADDR INTERVAL IPADDR
--------------------------------------------------------------------------------
2 initialize disabled 100 0.0.0.0 1 0.0.0.0
Figure 4-5.
show vlan info vrrp extended
Command Output
show ip vrrp Commands
These commands display information about VRRP as configured on the switch.
show ip vrrp info Command
The
show ip vrrp info command displays VRRP information on the interface.
If a virtual router ID or an IP address is entered, the information will be displayed
only for that VRID or that interface; if not, all VRRP interfaces are listed.
cli.book Page6 Wednesday,April19, 2000 3:14PM