Filter
Top Products
IP Multicast Commands
208967-B 5-5
leaf-timeout <integer> Sets the length of time (in seconds) the router
waits for a response from a neighbor before
considering the attached network to be a leaf
network.
• <integer> is the range of 25 to 4000;
the default is 200.
nbr-timeout <integer> Sets the length of time (in seconds) the router
waits to receive a report from a neighbor before
considering the connection inactive.
• <integer> is the range of 35 to 8000;
the default is 35.
nbr-probe-interval
<integer>
Sets the time interval (in seconds) for the DVMRP
router to send a neighbor probe message on its
interface.
• <integer> is the range of 5 to 30 seconds;
the default is 10.
triggered-update-interval
<integer>
Sets the time interval (in seconds) between
triggered update messages sent when routing
information changes.
• <integer> is the range of 5 to 1000;
the default is 5.
update-interval <integer> Sets the time interval (in seconds) between
DVMRP router update messages.
• <integer> is the range of 10 to 2000;
the default is 60.
config ip dvmrp
followed by:
cli.book Page5 Wednesday,April19, 2000 3:14PM