Filter
Top Products
Policies Commands
208967-B 7-15
show ip policy ospf announce info Command
The
show ip policy ospf announce info command displays information
about the OSFP announce policies configured on the switch. If a policy ID is
entered, the display lists information for only that policy.
This command uses the format:
show ip policy ospf announce info [id <value>]
Figure 7-11 is a sample.
Passport-8610# show ip policy ospf announce info
================================================================================
Policy Ospf Announce Info
================================================================================
PID NAME ENABLE PREC RTSRC ACTION TYPE MTRC
--------------------------------------------------------------------------------
2003 POLICY-2003 true 0 direct|static|rip ignore ty
pe2 0
Figure 7-11.
show ip policy ospf announce info
Command Output
show ip policy ospf announce lists Command
The
show ip policy ospf announce lists command displays list
characteristics of the OSPF announce policies configured on the switch or for a
specified policy ID.
The syntax is:
show ip policy ospf announce lists [id <value>]
Figure 7-12 is a sample.
Passport-8610# show ip policy ospf announce lists
================================================================================
Policy Ospf Announce List
================================================================================
POLICY_ID EXACTNETLIST RANGENETLIST ADVERNETLIST RIPGATELIST RIPINTERLIST
--------------------------------------------------------------------------------
200300000
Figure 7-12.
show ip policy ospf announce lists
Command Output
cli.book Page15 Wednesday, April 19,2000 3:14 PM