Filter
Top Products
IP Routing and ARP Commands
208967-B 1-9
show ports info brouter-port Command
The
show ports info brouter-port command displays brouter port
information for their associated VLANs.
This command uses the syntax:
show ports info brouter-port
Figure 1-9 is an example.
Passport-8610# show ports info brouter-port
Port Vlan Id
==== =======
1/1 2
Figure 1-9.
show ports info brouter-port
Command Output
vlan ip Commands
These commands are the general routing commands on the VLAN. Other VLAN
commands are included in the section dealing with the protocol or feature
(for example, DHCP).
config vlan ip Commands
The general
config vlan ip commands require a VLAN ID <vid> from 1 to
4094.
The commands take the following syntax and parameters:
config vlan <vid> ip
followed by:
info Displays VLAN routing characteristics.
create <ipaddr/mask>
[mac_offset <value>]
Assigns an IP address and subnet mask to the VLAN.
• <ipaddr/mask> is the IP address and mask
{a.b.c.d}.
• [mac_offset <value>] is auser-assigned MAC
address. This MAC address is in place of the
default MAC address.
delete <ipaddr> Deletes the specified VLAN address.
cli.book Page9 Wednesday,April19, 2000 3:14PM