Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
7-14 208967-B
Figure 7-9 is an example.
Passport-8606# show ip policy ospf accept info
================================================================================
Policy Ospf Accept Info
================================================================================
PID NAME ENABLE PREC ACTION OSPFTYPE
--------------------------------------------------------------------------------
6003 POLICY-6003 true 0 accept any
Figure 7-9.
show ip policy ospf accept info
Command Output
show ip policy ospf accept lists Command
The
show ip policy ospf accept lists command displays the accept lists on
the switch. If an ID is entered, only that list is displayed.
This command uses the syntax:
show ip policy ospf accept lists [id <value>]
Figure 7-10 is a sample.
Passport-8606# show ip policy ospf accept lists
================================================================================
Policy Ospf Accept List
================================================================================
POLICY_ID EXACTNETLIST RANGENETLIST INJECTNETLIST
--------------------------------------------------------------------------------
6003 0 0 0
Figure 7-10.
show ip policy ospf accept lists
Command Output
show ip policy ospf accept match network Command
The
show ip policy ospf accept match network command lists the policies
that match the specified network with a range or exact match.
This command uses the syntax:
show ip policy ospf accept match network <value>
The format is the same as the command for a RIP accept policy displayed in
Figure 7-15 on page 7-17.
cli.book Page14 Wednesday, April 19,2000 3:14 PM