Nortel Networks 8000 Series Switch User Manual


 
CLI Command List
208967-B A-7
config ip policy rip announce <pid> action <announce|ignore>
config ip policy rip announce <pid> add-route-source <direct|static|rip|ospf|any>
config ip policy rip announce <pid> advertise-netlist <netlist id>
config ip policy rip announce <pid> create
config ip policy rip announce <pid> delete
config ip policy rip announce <pid> disable
config ip policy rip announce <pid> enable
config ip policy rip announce <pid> exact-netlist <netlist id>
config ip policy rip announce <pid> info
config ip policy rip announce <pid> name <string>
config ip policy rip announce <pid> ospf-router-id-list <addrlist id>
config ip policy rip announce <pid> ospf-route-type <type1|type2|external|internal|any>
config ip policy rip announce <pid> outbound-interface-list <addrlist id>
config ip policy rip announce <pid> precedence <precedence>
config ip policy rip announce <pid> range-netlist <netlist id>
config ip policy rip announce <pid> remove-route-source <direct|static|rip|ospf|any>
config ip policy rip announce <pid> rip-gateway-list <addrlist id>
config ip policy rip announce <pid> rip-interface-list <addrlist id>
config ip policy rip announce <pid> rip-metric <rip-metric>
config ip policy rip info
page 7-10
config ip rip disable
config ip rip domain <ipaddr> <value>
config ip rip enable
config ip rip holddown <seconds>
config ip rip info
config ip rip updatetime <seconds>
config ip rip receive <ipaddr> mode <value>
config ip rip send <ipaddr> mode <value>
page 3-1
config ip route delete <ipaddr/mask>
config ip route info
config ip route-discovery disable
config ip route-discovery enable
config ip route-discovery info
page 1-1
config ip static-route create <ipaddr/mask> next-hop <value> cost <value>
config ip static-route delete <ipaddr/mask> next-hop <value>
config ip static-route disable <ipaddr/mask> next-hop <value>
config ip static-route enable <ipaddr/mask> next-hop <value>
config ip static-route info
page 1-1
config ip traffic-filter clear-stats [<fid>]
config ip traffic-filter create destination dst-ip <value> [src-ip <value>]
config ip traffic-filter create global [src-ip <value>] [dst-ip <value>]
config ip traffic-filter create info
config ip traffic-filter create traffic-profile <pid>
config ip traffic-filter create source src-ip <value> [dst-ip <value>]
page 8-6
Table A-1. CLI Command List (continued)
cli.book Page7 Wednesday,April19, 2000 3:14PM