Filter
Top Products
IP Routing and ARP Commands
208967-B 1-3
Figure 1-1 shows config ip info output.
Passport-8610/config/ip# info
Sub-Context: arp dhcp-relay dvmrp forwarding l3-igmp mroute ospf
policy rip route route-discovery static-route traffic-filter udpfwd
Current Context:
default-ttl : 255
Figure 1-1.
config ip info
Command Output
Figure 1-2 shows config ip static-route info command output.
Passport-8610# config ip static-route info
create :
- 0.0.0.0/0.0.0.0
next-hop - 10.10.40.1
cost - 1
status - ACTIVE
enable - TRUE
disable : N/A
delete : N/A
enable : N/A
Figure 1-2.
config ip static-route info
Command Output
static-route disable
<ipaddr/mask> next-hop
<value>
Disables a static route.
• <ipaddr/mask> is the IP address and mask for the
route’s destination.
• next-hop <value> is the IP address of the next
hop router; the next router at which packets must
arrive on this route.
static-route enable
<ipaddr/mask> next-hop
<value>
Enables a static route.
• <ipaddr/mask> is the IP address and mask for the
route’s destination.
• next-hop <value> is the IP address of the next
hop router; the next router at which packets must
arrive on this route.
static-route info Displays characteristics of the created static route.
config ip
followed by:
cli.book Page3 Wednesday,April19, 2000 3:14PM