Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
6-12 208967-B
show ipx default Command
The
show ipx default command displays the current IPX RIP and SAP timer
default values on the switch.
The command uses the syntax:
show ipx default
Figure 6-4 is a sample display.
Passport-8610/show/ipx# default
===========================================================================
Ipx Default Values
===========================================================================
RIP Hold-Multiplier: 3
RIP Delay-Timer: 50 msec (20 per sec)
RIP Update-Timer: 60 sec
SAP Hold-Multiplier: 3
SAP Delay-Timer: 50 msec (20 per sec)
SAP Update-Timer: 60 sec
Figure 6-4.
show ipx default
Command Output
show ipx route Command
The
show ipx route command displays information about the IPX route(s) on
the switch or a specific IPX route, including the type, hop count, and ticks.
The command syntax is:
show ipx route [<IPX-network-number>] [<IPX-network-number>]
Figure 6-5 is a sample output.
Passport-8610/show/ipx# route
================================================================================
Ipx Route
================================================================================
IPX_NET NEXT_HOP TYPE HOPS TICS PORT TTL
--------------------------------------------------------------------------------
00004444 00004444.00:80:2d:23:02:00 Local 1 1
00005555 00005555.00:80:2d:23:02:01 Local 1 1
00008888 00004444.00:80:2d:23:02:00 Static 1 2 cpp
cli.book Page12 Wednesday, April 19,2000 3:14 PM