Filter
Top Products
Reference for the Accelar 8000 Series Command Line Interface Routing Operations
8-14 208967-A
The commands use the following syntax and parameters:
Figure 8-8
shows an example of the config ip traffic-filter set info
command.
Passport-8610/config/ip/traffic-filter# set 301 info
Sub-Context: create filter global-set set traffic-profile
Current Context:
create :
name -
delete : N/A
add-filter :
remove-filter : N/A
Figure 8-8.
config ip traffic-filter set info
Command Output
config ip traffic-filter traffic-profile <pid> Commands
The
config ip traffic-filter traffic-profile <pid> commands allow
you to set rate limiting profiles to police traffic streams. These commands use a
Profile ID
<pid> between 1 and 64.
config ip traffic-filter set <setid>
followed by:
info Displays the filter set characteristics.
add-filter <fid> Adds a filter to a filter set.
• <fid> is the traffic filter ID range of 1 to 4000.
create [name <value>] Creates a filter set.
• name <value> is the set name {string}.
delete Deletes a filter set.
remove-filter <fid> Removes a filter from a filter set.
• <fid> is the traffic filter ID range of 1 to 4000.
cli.book Page14 Wednesday, April 19,2000 3:14 PM