Filter
Top Products
IP Multicast Commands
208967-B 5-11
Figure 5-11 is a sample.
Passport-8610# show ports info dvmrp
===========================================================================
Port Ip Dvmrp
===========================================================================
PORT-NUM DVMRP-ENABLE METRIC
---------------------------------------------------------------------------
9/1 disable 1
9/2 disable 1
9/3 disable 1
9/4 disable 1
9/5 disable 1
9/6 disable 1
9/7 disable 1
9/8 disable 1
Figure 5-11.
show ports info dvmrp
Command Output
config vlan <vid> ip dvmrp Commands
The config vlan ip dvmrp commands configure DVMRP on the VLAN (<vid>
from 1 to 4094) and use the following syntax and parameters:
config vlan <vid> ip dvmrp
followed by:
info Displays DVMRP settings on the VLAN.
enable Enables DVMRP on the VLAN.
disable Disables DVMRP on the VLAN.
metric <cost> Sets the DVMRP route metric.
• <cost> is the maximum number of hops with a
value of 1 to 31.
cli.book Page11 Wednesday, April 19,2000 3:14 PM