Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
3-22 208967-B
show ip ospf interface Command
The
show ip ospf interface command displays information about the OSPF
interface.
The command uses the syntax:
show ip ospf interface
Figure 3-16 is the output.
Passport-8610/show/ip/ospf# interface
================================================================================
Ospf Interface
================================================================================
INTERFACE AREAID ADMINST IFST METR PRIO DR/BDR AUTHKEY AUTHTYPE
--------------------------------------------------------------------------------
130.1.1.1 1.1.1.1 enable BDR 10 1 130.1.1.2 none
130.1.1.1
================================================================================
Ospf Virtual Interface
================================================================================
AREAID NBRIPADDR STATE AUTHKEY AUTHTYPE
--------------------------------------------------------------------------------
Figure 3-16.
show ip ospf interface
Command Output
show ip ospf int-timers Command
The
show ip ospf int-timers command displays the parameters for the OSPF
interface timers.
The command uses the syntax:
show ip ospf int-timers
Figure 3-17 is the output.
Passport-8610# show ip ospf int-timers
================================================================================
Ospf Interface Timer
================================================================================
TRANSIT RETRANS HELLO DEAD POLL
INTERFACE AREAID DELAY INTERVAL INTERVAL INTERVAL INTERVAL
--------------------------------------------------------------------------------
10.10.40.3 0.0.0.0 1 5 10 40 120
Figure 3-17.
show ip ospf int-timers
Command Output
cli.book Page22 Wednesday, April 19,2000 3:14 PM