Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
7-2 208967-B
• config ip policy rip accept commands
•
config ip policy rip announce commands
config ip policy addrlist Commands
The
config ip policy addrlist commands allow you to set address list
matching criteria to suit a given route. The parameter <listid> is the address list
ID (1 to 1000).
The commands use the following syntax and parameters:
Figure 7-1
shows an example of the config ip policy addrlist info
command.
Passport-8610# config ip policy addrlist 1 info
Sub-Context:
Current Context:
create :
delete : N/A
name : ADDRLIST#1
add-address :
remove-address : N/A
Figure 7-1.
config ip policy addrlist info
Command Output
config ip policy addrlist <listid>
followed by:
info Displays the address list characteristics.
add-address <ipaddr> Adds an IP address to the policy address list.
create Creates a policy address list.
delete Deletes the policy address list.
name <name> Assigns a name to the policy address list.
remove-address <ipaddr> Removes an address from the policy address list.
cli.book Page2 Wednesday,April19, 2000 3:14PM