Filter
Top Products
DHCP and UDP Commands
208967-B 2-7
Figure 2-5 shows a sample of the config vlan ip dhcp-relay info command.
Passport-8610# config vlan 1 ip dhcp-relay info
Sub-Context:
Current Context:
dhcp-relay : disable
broadcast : disable
max-hop : 4
min-sec : 0
mode : both
Figure 2-5.
config vlan ip dhcp-relay info
Command Output
show vlan info dhcp-relay Command
The
show vlan info dhcp-relay command displays the DHCP parameters for
all VLANs or for the specified VLAN. The interface index (IF Index) is assigned
as the VLAN is created. Numbers 1 to 256 are ports; numbers above 257 are
VLANs.
This command uses the syntax:
show vlan info dhcp-relay [<vid>]
Figure 2-6 is a sample.
Passport-8610# show vlan info dhcp-relay
==================================================================
Vlan Dhcp
==================================================================
VLAN IF MAX MIN ALWAYS
ID INDEX ENABLE HOP SEC MODE BCAST
------------------------------------------------------------------
1 2049 false 4 0 both false
2 2050 false 4 0 both false
Figure 2-6.
show vlan info dhcp-relay
Command Output
cli.book Page7 Wednesday,April19, 2000 3:14PM