Filter
Top Products
RIP and OSPF Commands
208967-B 3-33
Figure 3-26 shows the output of the config vlan ip ospf info command.
Passport-8610# config vlan 2 ip ospf info
Sub-Context: clear config dump monitor show test trace
Current Context:
advertise-when-down : disable
ospf : enable
hello-interval : 10
dead-interval : 40
priority : 1
metric : 10
authentication-type : none
authentication-key :
area : 0.0.0.0
Figure 3-26.
config vlan ip ospf info
Command Output
show vlan info ospf Command
The
show vlan info ospf command shows the OSPF parameters configured for
all VLANs or the specified VLAN.
The command uses the syntax:
show vlan info ospf [<vid>]
Figure 3-27 is a sample.
Passport-8610# show vlan info ospf
================================================================================
Vlan Ospf
================================================================================
VLAN HELLO RTRDEAD DESIGRTR
ID ENABLE INTERVAL INTERVAL PRIORITY METRIC AUTHTYPE AUTHKEY AREAID
--------------------------------------------------------------------------------
1 false 10 40 1 0 none 0.0.0.0
2 true 10 40 1 10 none 0.0.0.0
3 false 10 40 1 0 none 0.0.0.0
4 false 10 40 1 0 none 0.0.0.0
Figure 3-27.
show vlan info ospf
Command Output
cli.book Page33 Wednesday, April 19,2000 3:14 PM