Filter
Top Products
Policies Commands
208967-B 7-7
Figure 7-4 shows an example of the config ip policy ospf announce info
command.
Passport-8610/config/ip/policy/ospf# announce 2003 info
Sub-Context: accept announce
Current Context:
action : ignore
add-route-source : direct|static|rip
advertise-net-list : 0
create :
delete : N/A
enable : true
exact-netlist : 0
exact-metric : 0
ext-metric-type : type2
name : POLICY-2003
precedence : 0
range-netlist : 0
remove-route-source : N/A
rip-gateway-list : 0
rip-interface-list : 0
Figure 7-4.
config ip policy ospf announce info
Command Output
remove-route-source
<direct|static|rip|any>
Removes a route source from the announce policy.
rip-gateway-list
<addrlist id>
Identifies the RIP gateway lists that are associated
with this announce policy.
• <addrlist id> is the RIP gateway list ID (0 to
1000) and applies only to RIP sourced routes if
RIP is included as a route source.
rip-interface-list
<addrlist id>
Indicates the entries in the RIP interface lists that are
associated with this announce policy.
• <addrlist id> is the RIP interface list ID (0 to
1000) and applies only to RIP sourced routes if
RIP is included as a route source.
config ip policy ospf announce <pid>
followed by:
cli.book Page7 Wednesday,April19, 2000 3:14PM