Filter
Top Products
RIP and OSPF Commands
208967-B 3-7
show ports info rip Command
The
show ports info rip command displays information about the RIP
parameters of the specified port or all ports.
The command uses the format:
show ports info rip [<ports>]
Figure 3-5 is an example.
Passport-8610# show ports info rip
================================================================================
Port Rip
================================================================================
PORT ADVERTISE ACCEPT TRIGGERED AUTOAGG
NUM ENABLE DEFAULT DEFAULT UPDATE ENABLE SUPPLY LISTEN POISON
--------------------------------------------------------------------------------
9/1 false false false false false true true false
9/2 false false true false false true true false
9/3 true false false false false true true false
9/4 false false false false false true true false
9/5 false false false false false true true false
9/6 false false false false false true true false
9/7 false false false false false true true false
Figure 3-5.
show ports info rip
Command (Partial Output)
Disabled Enabled Listens only for the default.
Enabled Enabled Listens for RIP updates
including the default route (if it
exists).
Table 3-1. RIP Supply and Listen Settings and Switch Action
RIP Supply Settings RIP Listen Settings
Switch Action
Supply Default Supply Listen Default Listen
cli.book Page7 Wednesday,April19, 2000 3:14PM