Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
3-12 208967-B
Figure 3-8 shows a sample of the config ip ospf info command.
Passport-8610/config# ip ospf info
Sub-Context: bootconfig cli diag ethernet ip ipx log mlt rmon stg sys vlan
web-server qos
Current Context:
admin-state : disable
as-boundary-router : disable
default-metric :
ethernet - 100
fast-ethernet - 10
gig-ethernet - 1
auto-vlink : disable
holddown : 10
trap : disable
router_id : 45.57.240.0
enable : false
Figure 3-8.
config ip ospf info
Command Output
config ip ospf host-route Commands
Use the
config ip ospf host-route commands to configure OSPF host route
parameters for the Passport 8000 Series switch.
The syntax includes the IP address
<ipaddr> of the host router and the following
parameters:
config ip ospf host-route <ipaddr>
followed by:
info Displays the current OSFP host-route configuration
on the switch.
create Creates an OSPF host route for the IP address.
delete Deletes an OSPF host route for the IP address.
metric <metric> Sets the metric (cost) for the host route.
• <metric> is between 1 and 65535.
cli.book Page12 Wednesday, April 19,2000 3:14 PM