Filter
Top Products
Reference for the Passport 8000 Series Command Line Interface Routing Operations
5-12 208967-B
Figure 5-12 shows a sample of the config vlan ip dvmrp info command.
Passport-8610# config vlan 1 ip dvmrp info
Sub-Context:
Current Context:
dvmrp : enable
metric : 1
Figure 5-12.
config vlan ip dvmrp info
Command Output
show vlan info dvmrp Command
The
show vlan info dvmrp command displays the DVMRP configuration for
all VLANs or the specified VLAN.
The command uses the syntax:
show vlan info dvmrp [<vid>]
A sample output is shown in Figure 5-13.
Passport-8610# show vlan info dvmrp
===========================================================================
Vlan Ip Dvmrp
===========================================================================
VLAN-ID DVMRP-ENABLE METRIC
---------------------------------------------------------------------------
1 enable 1
Figure 5-13.
show vlan info dvmrp
Command Output
Layer 3 IGMP Commands
The Internet Group Management Protocol (IGMP) is used by hosts to report their
multicast group memberships to neighbor multicast routers. DVMRP multicasting
must be enabled globally on the switch for these commands to take effect. IGMP
configuration is on a per interface basis.
cli.book Page12 Wednesday, April 19,2000 3:14 PM